Manufacturing Test Framework
Our production test framework: SMT tests for PCBs, FATP tests for finished devices, aging, and a report for every unit. Built for our own LaMetric production and adapted to your product.
Devices online in our own fleet
Defect rate in volume production
Secure OTA releases
Countries our devices ship to
What it saves you
Building test station software from scratch, and the mistakes that cost yield in the first production runs.
Test software from scratch
Every product rebuilds test, flashing and provisioning tools.
Yield problems found late
Without data, yield issues appear after the first batches ship.
Hard to replicate
Moving production to another line or EMS means starting over.
How it speeds up your product
Less risk from day one
The hard parts already run in production in our own devices, so your project doesn't carry their technical risk.
Costs less than starting from scratch
The project covers adapting a proven foundation to your product, which costs less than building that layer from zero. Your budget goes into your features, not infrastructure.
Months sooner to market
We adapt a proven foundation to your product, so field-ready devices ship sooner.
Yours to use commercially
A one-off licence for your product comes with the project.
From bare board to shipped product
1. SMT tests for PCBs
2. FATP tests for finished devices
3. Aging
4. Reports
What it is
One framework for every test stage on the line, from bare board to packed product, with a record for every unit.
SMT tests for PCBs
Boards are tested in a fixture after assembly: radios, audio, LEDs, keys, memory and interfaces, each with a pass or fail.
FATP tests for finished devices
The operator scans each assembled product and the test app checks every function.
Packed-weight check
The last FATP step: the packed product is weighed and checked before it ships.
Aging
Finished products run in an aging rack before they reach customers.
Reports and traceability
A report for every unit: per-test results, test log, part connection and repair logs, and the components on the board.
Real-time remote monitoring
Track production tests live from your HQ, wherever the factory is: pass rates, failures and per-unit reports as they happen.
Flashing and provisioning
Firmware flashing and device provisioning as part of the same flow.
How we adapt it to your product
1. Map your test plan
We define the SMT, FATP and aging checks for your product.
2. Adapt the framework
Test apps and fixtures for each stage, built on the framework we use for LaMetric.
3. Bring up the line
Stations go live at your factory or EMS, with documentation and operator training.
4. Track every unit
Reports and logs per unit, so you can trace and fix issues.
Last FATP step: packed-weight check
Supported platforms
Adapted to your hardware platform and cloud. Tell us about your stack.
Related Case Studies
Our own product, end to end: industrial design, electronics, firmware, cloud, volume production and years of OTA updates in the field.
How we engineered a modular light where every panel has its own electronics and firmware, yet any shape on the wall maps itself with one phone scan and updates over the air as one product.
How we turned data from hundreds of inverters, meters and gateways into live, branded screens that install in about 10 minutes and run 24/7, managed and updated over the air.
Planning something similar?
Tell us where you are. A senior engineer replies within one business day.
Talk to an engineer, not a salesperson
Idea, prototype, production or a fleet in the field: tell us where you are. A senior engineer replies within one business day.
Your benefits:
- Senior embedded engineers
- Hardware, firmware and cloud
- From prototype to fleet
- Clear scope and next steps
- Direct technical answers
- No sales pitch
What happens next?
A free 30-minute call with a senior engineer
A short technical discovery
A proposal with scope, timeline and cost
