Energy Gateway
An edge energy management foundation built on the inverter, meter and battery integrations proven in our own LaMetric smart energy displays: Modbus and SunSpec, fully on site, steering EV chargers, heat pumps and water heating to solar surplus and cheaper tariffs.
Devices online in our own fleet
Defect rate in volume production
Secure OTA releases
Countries our devices ship to
What it saves you
Building device integrations, control logic and tariff handling from scratch before your energy product does anything useful.
Every device speaks differently
Each inverter, meter, battery and charger needs its own integration before energy features can start.
Control logic is the hard part
Solar surplus, time-of-use and dynamic tariffs, and device priorities take long tuning in real homes.
Two audiences, two apps
Installers need setup tools and homeowners need simple controls, and both are usually built late.
How it speeds up your product
Less risk from day one
The hard parts already run in production in our own devices, so your project doesn't carry their technical risk.
Costs less than starting from scratch
The project covers adapting a proven foundation to your product, which costs less than building that layer from zero. Your budget goes into your features, not infrastructure.
Months sooner to market
We adapt a proven foundation to your product, so field-ready devices ship sooner.
Yours to use commercially
A one-off licence for your product comes with the project.
What it is
A local, edge-based energy management system built on the energy device integrations that already run in our own LaMetric smart energy displays. It works with solar inverters, smart meters, batteries and utility meters, and controls high-consumption devices. We adapt it to your hardware, brand and market.
Fully local control
Decisions run on the device, not only in the cloud.
Solar surplus routing
EV charging, heat pumps, heating elements and appliances run on your own solar first.
Tariff autopilot
Time-of-use (daily and seasonal) and dynamic tariffs shift loads to cheaper periods.
Monitoring and history
Real-time production, consumption and grid balance, with up to 10 years of usage history. Vendor-independent.
Installer and homeowner apps
Installers configure, homeowners adjust preferences.
Open integrations
Home Assistant and open interfaces to other IT systems.
Secure boot and OTA
Devices stay protected and up to date in the field.
White-label ready
Ships under your brand.
More about the Energy Platform
Supported platforms
Adapted to your hardware platform, devices and cloud. Tell us about your stack.
Case study
How we turned data from hundreds of inverters, meters and gateways into live, branded screens that install in about 10 minutes and run 24/7, managed and updated over the air.
Planning something similar?
Tell us where you are. A senior engineer replies within one business day.
Talk to an engineer, not a salesperson
Idea, prototype, production or a fleet in the field: tell us where you are. A senior engineer replies within one business day.
Your benefits:
- Senior embedded engineers
- Hardware, firmware and cloud
- From prototype to fleet
- Clear scope and next steps
- Direct technical answers
- No sales pitch
What happens next?
A free 30-minute call with a senior engineer
A short technical discovery
A proposal with scope, timeline and cost
